Book Categories:
Wait, don't go!
Before you leave, we have a special offer just for you!
Get 20% off your next purchase.
Clone-A-Willy and Balls Vibrator Molding Kit
$89.99
Key features
- Realistic vibrating molding kit to create a direct silicone cast of your favourite penis and balls
- Makes a vibrating silicone dildo with the exact size, shape and details of your chosen erection
- Added stimulation from the powerful multispeed vibrator
- Perfect as a naughty gift or for long-distance relationships
- Includes 2 powder bags to amply cover cock and balls
Description
Like Tom and Jerry or bunting and weddings, willies and balls are a divine pairing designed never to be apart. Reunite your 3 musketeers in vibrating silicone form with Clone-A-Willy’s premium kit, which has an added ball bowl for tip-to-stem replication.
Do your member justice by casting its full length and 2 veg, for prouder sizing and better stimulation in use. With everything you need to create a completely body-safe platinum-cure silicone realistic vibrator, this is a giggle-a-minute project and a unique shared experience.
In addition to its added ball mold this kit also features a multispeed vibrator to increase the range of sensations, operated by a wired rather than in-built controller for complete versatility during use.
Perfect as a sexy Christmas or Valentine’s gift.
The penis molding kit contains:
– Molding tube with testicle attachment
– Algae-based molding powder
– Platinum-cure silicone
– Multispeed vibrating unit
– Full illustrated instructions
– Stir stick
– Thermometer
| Allergens | Latex-Free, Phthalate-Free |
|---|---|
| Features | Has Balls, Set |
| Waterproof | No |
| Battery Info | 2 x AA batteries |
| Power Type | Batteries (not included) |
| Vibration speed | Multiple speeds |
| Flexibility | Firm |
| Material | Silicone |
13 reviews for Clone-A-Willy and Balls Vibrator Molding Kit
Add a review
Dellboy70 (verified owner) –
Christmas Gift From Heaven
This is the best gift i got my OH this Christmas! So apon her opening this gift she giggled and we both agrees right away to warm up my organ, stick on a cock ring and get to our moulding adventures! so after we read the instructions and put a really old towel down to catch any spillage after assembling the tube we got the water to the correct temperature and quickly added the powder to it we the poured it into the mould and my OH began kissing and touching me to keep me fully erect! My cock did not touch the sides of the tube surprisingly and i did not have any problems with this we then poured the silicone mixture into the mould and let it sit for 24 hours to set then the next day we pulled the silicone mould out and give it a good wash and cleaned up any moulding marks carefully with a craft knife then after we where happy we gave it a try and the vibrations from the little device is amazing! the balls are a great addition thanks for reading and i highly recommend
Jonny3301 (verified owner) –
Great fun
I bought this as a suprise for my missus as I’m often working different shifts to her. This was great fun to make and the final result was amazingly realistic. The vibe was pretty powerful too. You could make this on your own but is much better with your other half. All I need now is a clone a pussy I can put on a stroker
Hoid1236 (verified owner) –
Amazing Christmas Gift
My partner bought this for me for Christmas and it has been one of the most used gifts ;). I would recommend this kit over the one without the balls to everyone, especially anyone on the bigger size as apparently the other doesn’t quite make enough for you. Also, while the process is still messy, this kit is a bit less so and makes a more lifelike copy. The kit itself is nicely packaged and making the replica is simple in theory. However, you will need another person to help you and you will need to be very speedy. We didn’t use the vibrator in it but it is plenty of fun without and and the replica comes out incredibly realistic, I still can’t believe I’ve got a copy of myself! All in all, this is a really fun product both to make and to play with, you just need to be ready to be quick and get everything prepared when making. Also, I would either recommend a cock ring or taking some viagra when moulding as you need to stay hard for the duration.
Klark12 (verified owner) –
Nightmare
I wanted to Do this as a surprise for my other half. Delivery was quick as usual and very discrete. I waited till she was at work, got myself prepared, measured the tube and got myself ready with some stimulus and a ring. Then it went to pot! The speed needed and the angles, and the mess, made this a nightmare. Trying to maintain an erection whilst getting the temperature right was impossible. I’m a very good size, but the cretin that emerged from this looked like a twisted earthworm, can’t be used! I tried it again but same issue. Won’t be doing this again, product may be good if done correctly, but for me this was a waste of time and money.
Park (verified owner) –
Additional Instructions
This idea has been cleverly put together and comes with pretty good quality parts and ingredients and clear instructions. I am sure that when it works it creates a good replica however after two unfortunate events in the first part of the process I do feel that the instructions need an extra step to ensure a successful outcome and avoiding turning this potentially fun experience into a total disappointment and waste of money. My tuppence-worth on this whole thing would be to suggest that at the point in the instructions where tape has to be applied between the top of the tube and the ball cup to secure them together, that tape is also applied around the black plastic stopper at the bottom end of the tube to secure it in place. TWICE we lost all the moulding mixture because the weight of it in the tube, combined with the force of insterting an erect penis, pushed out the black stopper and we lost the entire contents. Also, as they suggest, this procedure really must be done in a bathroom, or room with a hard floor, which will be much easier to clean up than if any of the mix seeps out and lands on a carpet/bath mat etc. Yes it sets into a firm rubber which can be peeled of however there was still residue and “bits” to pick out. Please don’t let any of this put you off from trying out this kit. It has all the potential of being a rewarding experience overall.
Willywarmer (verified owner) –
Sex-toy tester
The clone a willie kit is amazing for both men and couples,I’ve had 3 now so I can actually nail the hardest thing about the whole kit… the timing.. If you are using this kit by yourself be prepared have everything measure out and ready, have the hottest porn on the keep yourself excited and fail miserably as the mould goes everywhere and you loose your boner but don’t give up hope make a new batch of mould grab your tightest cock ring and plunge your cock into the gooey warm substance, hang around for a minute or two and bam a lovely mould of your penis ready to be made into a lovely cock copy😍
Verified-Customer (verified owner) –
Amazing product!!! My girlfriend loves it!
My girlfriend loves far away from me so this was the perfect gift for her. I have it to her on Xmas and she said it was her favorite present by far. Now I just need a clone of her private too!!
Jay (verified owner) –
Was a lot of fun
I purchased this for something fun for my wife and I to try. It is definitely easier to do when you have a partner to help. It turned out pretty decent considering how fast you have to mix it up and apply. Hardest part is keeping your shlong from touching the sides. I also advise to either have a drop cloth handy or step into the shower like we did. It can get a bit messy. We didn’t use the vibrator as it makes the finished product too hard for my wife. Overall it was fun and the wife loved having a clone of my Willy.
Verified-Customer (verified owner) –
Needs a better mold ingredient
Needs a better mold ingredient. It works pretty good but the mold is too lumpy which the instruction says it will be but then when you pour the silicone in and it hardens it comes out not smooth and has imperfections. If they came out with a better mold making process I would give it a five star
MikeAdams (verified owner) –
Great quality, but tough
The quality is great but it is tough to do. I would say it is a 2 person job. I had to have my SO help me stay erected during the process of creating the mold. It definitely made this easier. The instructions are extremely straight forward and easy to follow. I will say that the final result is slightly smaller because it was tough for me to stay fully erect with my willy in the mold. It also can get a bit messy so I would recommend doing this in a bathtub or shower to make clean up easier! Extremely fun couples activity though and SO loves having a copy of my willy!This is a great bonding activity, and a perfect gift for those gentlemen who travel! Not sure the not so great reviews, I thought this was as great as you could expect! It comes with some challenges but nothing you cant figure out! Just take your time
AN1 (verified owner) –
Very fun process
Me and my gf bought this and had a great time making it. It didn’t turn out as perfect as we’d liked but was still pretty good for our first attempt.
Verified-Customer (verified owner) –
Terrible product
This product is awful do not buy. Very messy, needs two people and poor quality
Verified-Customer (verified owner) –
Looks like the real thing!
This turned out awesome. The mold make s mess but so does my girlfriend when she rides it